Established in 1990, China TianLe Led&light Products Co., Ltd. a professional plasma torch manufacturer and designer of an extensive range of led products, lights, torches, backlights, spotlights, bulbs, lamps and lighting products for indoor and outdoor, domestic and industrial uses. We have recieved both ISO9001 and ISO14001 certification and most of our plasma torches are certificated by CE, BS, UL, GS, ROHS, KEMA-KEUR. Moreover, Our QC department employees are able to offer you good device as SGS audit standard.

PCH/M torch consumables and maintenance parts. 1 Case. Arc energy in plasma welding can reach three times that of TIG welding causing less weld distortion and smaller welds with higher welding speeds. Welding time can be as short as 0.005 sec, ideal for spot welding of fine wires, while the accurate weld times, combined with precision motion devices, provide for repeatable weld start/stop positions in seam welding. Low amperage arc welding (as low as 0.05A) allows welding of miniature components and good control in downsloping to a weld edge. The arc diameter chosen via the nozzle orifice used assists in predicting the weld bead size. A plasma welding torch has an intricate internal design to carry plasma pilot gas, shield gas, water cooling hoses, and power cables for plasma pilot arc current and weld current.

HVAC sheet metal work
Cut steel for body work
unit uses only compressed air
no exotic gases needed
Cut steel for body work, HVAC sheet metal work, metal art. The unit uses only compressed air --no exotic gases needed-- and this makes it one of the safest and easiest ways to cut metal. Plasma arc welding features a protected electrode which allows for less electrode contamination. This is especially advantageous in welding materials that out gas when welded and contaminate the unprotected GTAW electrode. Plasma arc welding has forgiveness in arc length changes due to arc shape and even heat distribution. This results in the arc stand off distances not being as critical as in GTAW. Plasma arc welding gives a good weld consistency and no AVC is needed in 99% of applications, sometimes even with wirefeed. In summary, Thermico’s A60 fulfils all aviation industry requirements for layer specifications and production stability. The powder is axially injected into the plasma beam, while the beam transporting the powder is focused by a plasma nozzle.