Established in 1990, China TianLe Led&light Products Co., Ltd. a professional recessed lighting manufacturer and designer of an extensive range of led products, lights, torches, backlights, spotlights, bulbs, lamps and lighting products for indoor and outdoor, domestic and industrial uses. We have recieved both ISO9001 and ISO14001 certification and most of our recessed lightings are certificated by CE, BS, UL, GS, ROHS, KEMA-KEUR. Moreover, Our QC department employees are able to offer you good device as SGS audit standard.

Recessed lighting has become the preferred lighting in today's homes and businesses for many good reasons. Their versatility allows them to be placed throughout your ceiling for unobtrusive general lighting, positioned above the sink for task lighting, or aimed toward artwork as the perfect accent lighting. Whether your application is a Non-IC, IC or energy-saving Air Tight installation, the P87-AT housing model meets your requirements, eliminating the need to purchase and stock three separate housings.
Retrofit version of the P87-AT
Exclusive mounting slide bars permit quick and solid mounting in ceilings
Can be installed in ceilings from 0.5" to 1.5" thick
IC/Non-IC peel away label for field conversion
UL and CUL Listed for damp locations and through wiring
Rated for 4 #12 90 degree conductors (2 in/2 out)
Rated for 60 degree supply wired in end-of-run applications
US Patent #5758959
6.625" Ceiling Opening
7.825" x 10.75" Plaster Frame
7.5" Recessed Depth
0.5" and 0.75" Pryouts
Specifications

Welcome to Our Website and Good Luck.

As the concern for limiting energy costs increases, recessed lighting continues to be a major focus in state sponsored Model Energy Codes. Progress's recessed lighting eliminates unnecessary strains on heating and cooling systems by mounting inside the home, as compared to the earlier penetrations to the outer housing. Progress Lighting's Air-Tight recessed products provide value without additional cost, and is the only product that makes sense to maintain energy costs over the life of a home. For the complete fixture, trim and bulbs must be ordered separately.
Quick-connects allow simple installation of 12-20 AWG wire, without the need for wire nuts
120v NPF electronic ballast
Meets requirements for Enery Star
Meets California T-24 requirements
Not rated for through branch, but can be "daisy-chained"
One 4-pin triple or spiral 26w compact fluorescent lamp vertically mounted
Spans 24" T-bar spacing
Can be installed in ceilings from 1/2" to 2" thick
Ceiling opening: 6-7/8"
Plaster frame: 7-7/8" x 10-3/4"
Recessed depth: 7-1/2"
Pryouts: 1/2" and 3/4"